The control lever and buttons in the cab of the concrete mixer truck are important components of the concrete mixer truck, which are used to control various actions and functions of the concrete mixer truck. The following are the functions and operation methods of various control levers and buttons in the cab of the mixer truck.
Joystick
- Steering wheel
Used to control the driving direction of the concrete mixer truck. By turning the steering wheel, the vehicle’s forward, backward, and turning movements can be controlled.
- Acceleration Lever
sed to control the driving speed of the concrete self loading mixer truck. Pushing the acceleration lever forward can accelerate the vehicle; Pulling the accelerator lever backwards can slow down the vehicle.
- Brake Lever
Used to control the brake system of the concrete self loading mixer truck. Pushing the brake lever forward can activate the braking system, causing the vehicle to slow down or stop; Pulling the brake lever backwards can release the braking status and allow the vehicle to continue driving.
Control Buttons
- Power switch
Used to control the power switch of the concrete self loading mixer truck. Pressing the power switch can start or stop the concrete self loading mixer truck.
- Mixing control button
used to control the mixing system of the concrete self loading mixer truck. Pressing the mixing control button can start or stop the mixing system, allowing the concrete to start or stop mixing.
Feeding control button
Used to control the feeding system of the concrete self feeding mixer truck. Pressing the feeding control button can start or stop the feeding system, allowing the concrete to start or stop feeding.
Unloading control button
Used to control the unloading system of the concrete self loading mixer truck. Pressing the unloading control button can start or stop the unloading system, allowing the concrete to start or stop unloading.
Wiper control button
Used to control the wiper of the concrete self loading mixer truck. By pressing the wiper control button, the wipers can be turned on or off to clean the windshield of the driver’s cabin.
Horn control button
Used to control the horn of the concrete self loading mixer truck. Pressing the horn control button can emit a horn sound, which is used to warn or alert surrounding pedestrians or vehicles to ensure safety.
The above is the function and operation method of each control lever and button in the cab of themixer truck. During the operation, it is necessary to ensure compliance with relevant safety regulations and operating procedures to ensure the safety of personnel and equipment (lutonmachinery.com).
The following is the actual operation method of the control lever and button of the concrete mixer truck.
- Start the mixer truck
First, check the surrounding environment of the vehicle to confirm that there are no safety hazards. Then, enter the cab, adjust the seat to the appropriate position, and fasten the seat belt. Next, turn on the power switch and check if all functions of the dashboard are normal. Finally, press the clutch pedal all the way down and shift to start the mixer truck.
- Driving truck
Control the direction of vehicle travel by operating the steering wheel. Control the vehicle’s driving speed by operating the accelerator and brake levers as needed. During driving, pay attention to observing the road conditions and surrounding environment to ensure safe driving.
- Mixing concrete
After arriving at the construction site, park the mixer truck on a flat surface. Then, add an appropriate amount of water and other raw materials as needed. Next, switch the control button to the mixing mode and start the mixing system. During the mixing process, the mixing quality of concrete should be regularly checked to ensure compliance with requirements.
- Loading and unloading concrete
After the concrete is mixed, switch the control button to the loading mode and start the loading system. By operating the joystick, control the bucket to load concrete into a transport vehicle or other container. After the loading is completed, switch the control button to the unloading mode and start the unloading system. By operating the joystick, control the bucket to unload the concrete to the designated position.
- Stop operating the concrete self loading mixer truck
After completing the mixing, loading, and unloading operations, switch the control button to stop mode, and turn off the mixing system, loading system, and unloading system. Then, press the clutch pedal all the way down and shift to neutral. Finally, turn off the power switch and leave the cab.
It should be noted that when operating the concrete self loading mixer truck, relevant safety regulations and operating procedures must be strictly followed. At the same time, regular inspections and maintenance should be carried out on vehicles to ensure their normal operation and extend their service life. In addition, operators should receive professional training and possess relevant qualifications and experience to ensure the safe and efficient operation of concrete self loading mixer trucks.